The other day I had a DiMarzio Super Distortion in for a re-wind. A classic pickup, first made in 1972 and still ROCKS. I’m not sure how old this one is but it has certainly had a life.
I love seeing the Ohms of each coil hand written on the underside of the bobbins.
The whole thing is powered by that over thick ceramic magnet, offset to one side and with a steel bar down the side of one set of bolts to compensate for it. It’s that magnet that gives it the power, articulation and sensitivity.
Never judge a pickup by its ohms!
You will have heard these on thousands of recordings the DiMarzio Super Distortion is such a classic.
Pickup re-winds are a big part of what I do.
In the early days back in the 1990’s I re-wound a lot of pickups. It was an invaluable introduction into the inner workings of electric guitar pickups.
Back then there were a lot of 60’s and 70’s quality pickups around to practice on, they weren’t as valuable or sought after as they are now. Because of that I got to see how pickups were put together in the old days, the construction, the potting material…
There wasn’t much information available so experimentation was the only way to learn. I made so many bad pickups back then but made a note of every single one, how I’d wound it and what the result was. By using that method I got closer and closer to what I wanted. I also made a note of all the re-winds I did and the original spec if I could get it. I’m still writing in that note book to this day and it’s becoming a fantastic reference tool when I receive an unusual pickup repair from a customer.
I still really enjoy re-winding pickups, I think I have a strong instinct to fix things. I would much rather repair a faulty old pickup than sell a customer a new one. Sometimes, of course, the customer wants a different sound that the old pickup can’t give them and a new pickup is the way to go.
Please feel free to contact me about any faulty pickup by email (email@example.com) or by phone (021 912 678).