Posted on Leave a comment

Precision Bass Pickup

Single – “Precision Bass” NZ$199 for NZ customers, if you’re overseas it’s GST free; NZ$173.04

Alnico V – 10.9 kOhms

Precision Bass Pickup Demo

The P Bass split pair is based on the Fenders of the early/mid 60’s. Full and clear with that distinctive mid range that sits well in any mix. It is the essence of bass. It has the woody, full tones we all love. As a stand alone or used with my Jazz Bass bridge pickup as part of a PJ set.

Arguably the most important instrument of all of Leo Fender’s creations the P bass changed music more than any other instrument. From James Jameson to Steve Harris, the P Bass is surprisingly versatile and has such a distinctive tone.

As with the early pickups this split pair is built to be hum cancelling – the two coils are electrically out of phase but also magnetically out of phase. Here’s an explanation: How Humbuckers Work

With fingers, with a pick and especially with flat wounds.

My Precision Bass pickups are designed to be used with 250 K Ohm pots.

updated 5 May 2025

Precision Bass pickup by MrGlyns Pickups

For more P Bass fun: https://mrglynspickups.com/2021/04/06/bass-pickup-re-wind/

Enjoy this? You may also like…

Posted on Leave a comment

Telecaster Bass

Single – Telecaster Bass NZ$165 for NZ customers, if you’re overseas it’s GST free; NZ$143.48

Alnico V – 6.8 kOhms

Telecaster Bass demo

There is something so unbelievably cool about the Fender Telecaster Bass. The classic lines, that headstock, the pickguard, the association with great players and, of course, the tone. What ever it is we all love about this great instrument here’s a pickup to do it justice.

Whether you play with fingers or a pick this classic pickup will deliver. More present in the mix than the Precision split pair but with that distinctive punch and clarity.

This is the straight version of the P Bass pickup, often called the ’51 Bass Pickup so as not to confuse it with the split pair P bass pickup.

Over the years I’ve re-wound a lot of old Fender pickups. I like to make notes to record what I find in these old pickups, wire gauge, insulation types, d.c. resistance, magnetic gauss, dimensions. My notebook is getting pretty full. This is my constant reference when I’m designing a new pickup, that and my ears.

I’ve based these pickups on the best of the old Fenders I’ve come across over the years. Not all vintage pickups are great but when you see enough of the good ones patterns begin to form.

I still repair pickups and still add to my old notebook, always learning 😎.

updated 5 May 2025

Telecaster bass, '51 bass pickup by Mr Glyn's Pickups

You can find all our demos here.

Enjoy this? You may also like…

updated 3 April 2023

Roboguy Logo
Posted on Leave a comment

‘74 Precision Bass Pickup Re-wind

Been doing a few pickup rewinds recently. This Precision Bass Pickup from 1974 had one coil completely open circuit. Pretty common for that era. If you’ve got an old Fender (not just basses) with a quiet, thin sounding pickup there’s a fair chance you need a re-wind.

Precision Bass pickup from 1974

‘74 Precision Bass Pickup

Pickup re-winds are a big part of what I do.

In the early days back in the 1990’s I re-wound a lot of pickups. It was an invaluable introduction into the inner workings of electric guitar pickups.

Back then there were a lot of 60’s and 70’s quality pickups around to practice on, they weren’t as valuable or sought after as they are now. Because of that I got to see how pickups were put together in the old days, the construction, the potting material…

There wasn’t much information available so experimentation was the only way to learn. I made so many bad pickups back then but made a note of every single one, how I’d wound it and what the result was. By using that method I got closer and closer to what I wanted. I also made a note of all the re-winds I did and the original spec if I could get it. I’m still writing in that note book to this day and it’s becoming a fantastic reference tool when I receive an unusual pickup repair from a customer like this ’74 precision bass pickup.

I still really enjoy re-winding pickups, I think I have a strong instinct to fix things. I would much rather repair a faulty old pickup than sell a customer a new one. Sometimes, of course, the customer wants a different sound that the old pickup can’t give them and a new pickup is the way to go (see the link to our Precision Bass below)

Please feel free to contact me about any faulty pickup by email (glyn@mrglynspickups.com) or by phone (+ 64 21 912 678). https://mrglynspickups.com/ and enjoy some of my demos here

Mr Glyns Precision bass pickup

Roboguy Logo

Enjoy this? You may also like…

updated 3 April 2023