Been doing a few pickup rewinds recently. This Precision Bass Pickup from 1974 had one coil completely open circuit. Pretty common for that era. If you’ve got an old Fender (not just basses) with a quiet, thin sounding pickup there’s a fair chance you need a re-wind.
‘74 Precision Bass Pickup
Pickup re-winds are a big part of what I do.
In the early days back in the 1990’s I re-wound a lot of pickups. It was an invaluable introduction into the inner workings of electric guitar pickups.
Back then there were a lot of 60’s and 70’s quality pickups around to practice on, they weren’t as valuable or sought after as they are now. Because of that I got to see how pickups were put together in the old days, the construction, the potting material…
There wasn’t much information available so experimentation was the only way to learn. I made so many bad pickups back then but made a note of every single one, how I’d wound it and what the result was. By using that method I got closer and closer to what I wanted. I also made a note of all the re-winds I did and the original spec if I could get it. I’m still writing in that note book to this day and it’s becoming a fantastic reference tool when I receive an unusual pickup repair from a customer like this ’74 precision bass pickup.
I still really enjoy re-winding pickups, I think I have a strong instinct to fix things. I would much rather repair a faulty old pickup than sell a customer a new one. Sometimes, of course, the customer wants a different sound that the old pickup can’t give them and a new pickup is the way to go (see the link to our Precision Bass below)
Please feel free to contact me about any faulty pickup by email (glyn@mrglynspickups.com) or by phone (+ 64 21 912 678). https://mrglynspickups.com/ and enjoy some of my demos here
Mr Glyns Precision bass pickup
Enjoy this? You may also like…
updated 3 April 2023