guitar diagram Archives - Mr Glyn's Pickups

I like to support my customers as much as I can so here is my drawing of Gibson Modern Wiring – Les Paul.

The modern wiring is used in most Les Pauls and it’s great for players wanting to roll off some treble when the guitar volume is turned down.

The difference between the modern and 50’s wiring is in how the tone capacitor is connected to the volume pot. It’s a very simple modification if you have 50’s wiring and are curious.

Modern Wiring – Les Paul

I’ve linked below to my 50’s wiring diagram so you can see the difference.

Another thing to remember is that you can actually use both wiring methods on the same guitar. It is possible, for instance, to use 50’s wiring for the neck pickup and modern for the bridge. That way the neck pickup would retain some clarity as you lower the volume. The bridge pickup (with the modern wiring) would loose a bit of high end with the volume down a bit and therefor smoothing off the treble. It just depends on what you’re trying to get out of your Les Paul. Then there’s capacitor choice, pot value, coiltap or series/parallel, or even out of phase – the list goes on. I will be writing more blogs to cover all that at some point.

It’s always important to remember that here is no right or wrong, despite what you may read on social media. It’s all just a matter of personal taste. These wiring differences are all subtle too, the place to start is with great pickups.

I’ve used my humbucker colour code.

Here’s my diagram for the 50’s style wiring https://mrglynspickups.com/2022/10/12/50s-wiring/

Here are some demos of my humbuckers https://youtube.com/playlist?list=PLOdXLT6XwMykEOjfDKlY6fBikNmVCBQXB