Posted on 1 Comment

50’s wiring

I like to support my customers as much as I can so here is my drawing of Gibson 50’s wiring. Hopefully it will help you fit your new pickups.

The 50’s wiring is great for players wanting to retain some treble when the guitar volume is turned down.

The difference between the 50’s and modern wiring is in how the tone capacitor is connected to the volume pot. It’s a very simple modification if you have modern wiring and are curious.

I recommend this wiring for my Integrity humbuckers –

I’ve used my humbucker colour code.

There really is nothing wrong with modern wiring, having your tone darken as you turn down the volume can be very useful in some settings. So try both and see which suits you best.

It seems that all the cool kids and ‘experts’ on the internet are telling us it has to be 50’s or nothing but for anyone with a soldering iron it’s an easy mod and completely reversible so experiment for yourself. You may find you like 50’s for the neck pickup and modern for the bridge.

Here are some demos of my humbuckers

Roboguy Logo

Mr Glyns ‘Integrity’ vintage voiced humbucker

Inspired by the early Gibson PAF pickups the Integrity-vintage humbucker give the classic full, balanced tone we all love. Asymmetric coils give an open sounding mid range and the Alnico II magnet gives clarity and balance. A rich bottom end, characterful mids and sweet treble make this a pickup set for every situation – Jazz, Blues, Rock, it does it all.

Every pickup manufacturer makes a “Vintage” humbucker based on the Gibson PAF, of course they do – old Gibsons sound so good.

So how come they all sound so different? Well, the simple answer is that PAF’s were all different. I’ve been a full time luthier since 1995, whenever I come across an old humbucker I test the ohms and the gause and have a good listen. They’re all different. My conclusion is that pickup manufacturers have taken the PAF they like and based their own version on that. Old PAF’s vary so much so modern ones do as well.

I like my own version to be clear sounding, have obvious string separation and definition and to keep clarity no matter how much gain. The mids must be strong and woody, this is not a “scooped” pickup. The clean sound needs to be chimey and clear with no mush; through a valve amp I want clarity. When I tickle it I want clean and vocal sounding when it clips. The bridge pickup needs to be well behaved with high gain and clear with enough cut through so the drummer knows you’re there. The neck smooth, clear and articulate. Warm but with none of the boom you get with a more powerful pickup.

I don’t want much do I.

My “Integrity”-vintage humbucker has an Alnico II magnet and I’ve used plain enamel insulated magnet wire with asymmetric coils to open up the mids. The very first pickup I ever made back in 1995 was a PAF style and I’ve been tweaking the recipe ever since. Like all my pickups I’ve used a number of test pilot players in its development as well as gigging it myself. It wasn’t until around 2015 that I settled on this particular design. I did a gig with a set in a PRS SE series only last weekend – sounded great to me.

The full and honest sound of the Integrity-vintage humbucker along with it’s timeless tone inspired the name “Integrity”.

Enjoy this? You may also like…

1 thought on “50’s wiring

Leave a Reply