This old Telecaster Pickup Repair came to me for a re-wind but as you can just see from the picture the problem turned out to be outside the coil.
You can just see the broken wire on the left. That blob of solder is a clue too, this pickup has been messed with.
It’s very common for a pickup to come to me for a full re-wind but it turns out to have a smaller problem.
This one is a fiddly Telecaster Pickup Repair because the broken end is the inner winding but I managed to fix it.
Pickup re-winds are a big part of what I do.
In the early days back in the 1990’s I re-wound a lot of pickups. It was an invaluable introduction into the inner workings of electric guitar pickups.
Back then there were a lot of 60’s and 70’s quality pickups around to practice on, they weren’t as valuable or sought after as they are now. Because of that I got to see how pickups were put together in the old days, the construction, the potting material…
There wasn’t much information available so experimentation was the only way to learn. I made so many bad pickups back then but made a note of every single one, how I’d wound it and what the result was. By using that method I got closer and closer to what I wanted. I also made a note of all the re-winds I did and the original spec if I could get it. I’m still writing in that note book to this day and it’s becoming a fantastic reference tool when I receive an unusual pickup repair from a customer.
I still really enjoy re-winding pickups, I think I have a strong instinct to fix things. I would much rather repair a faulty old pickup than sell a customer a new one. Sometimes, of course, the customer wants a different sound that the old pickup can’t give them and a new pickup is the way to go.
Please feel free to contact me about any faulty pickup by email (firstname.lastname@example.org) or by phone (021 912 678).